User's Manual

10
14. Wrap the Butterfly Cable (32) around a “V”-Pulley
(25). Attach the Pulley and a Large Cable Trap
(27) to the bracket on the Centre Upright (5) with
an M10 x 60mm Bolt (47) and an M10 Nylon
Locknut (49).
16. Wrap the Butterfly Cable (32) around a “V”-Pulley
(25). Attach the Pulley and a Large Cable Trap
(27) to the bracket on the Centre Upright (5) with
an M10 x 60mm Bolt (47) and an M10 Nylon
Locknut (49).
17.
Attach the Butterfly Cable (32) to the bracket on
the Right Butterfly
Arm (1
1) with an M8 x 22mm
Shoulder Bolt (60) and an M8 Nylon Locknut (48).
15. Remove the 90mm Pulleys (24) from the pre-
assembled Double “U”-Bracket (29).
Wrap the Butterfly Cable (32) under a 90mm
Pulley (24). Attach the Pulley to the Double “U”-
Bracket with an M10 x 45mm Bolt (57) and an
M10 Nylon Locknut (49).
14
49
Bracket
47
25
27
32
5
15
24
57
49
29
16
17
48
60
1
1
32
47
32
49
5
27
Bracket
Bracket
25
32