User's Manual

6
2. Attach the Rear Stabiliser (3) to the Frame (1)
with three M8 x 15mm Button Screws (5) and
t
hree M8 Curved Washers (6).
4. Remove the Long Bolt Set (25) from the Right
and Left Adjustment Brackets (27, 28).
Attach the “T”-frame (30) to the Right and Left
Adjustment Brackets (27, 28) with two “T”-frame
Bushings (29) and the Long Bolt Set (25). Do not
overtighten the Long Bolt Set. Note: The “T”-
frame Bushings may be preattached.
3. Attach the Back Frame (22) to the Frame (1) with
an M8 x 60mm Button Bolt (43), an M8 Washer
(33), and an M8 Locknut (34). Do not overtight-
en the Locknut; the Back Frame must be able
to pivot easily.
1
2
3
5
5
5
6
6
22
43
3
4
33
34
1
25
25
29
30
28
27