User's Manual

9
9. Insert two M8 x 65mm Carriage Bolts (40) up
through a Rack Stabilizer (1). Attach the Left
P
ost (6) and the Left Base (2) to the Rack
Stabilizer with the Carriage Bolts, two M8 x
9
0mm Bolts (38), and four M8 Nylon Locknuts
(43).
Repeat this step with the other Rack
Stabilizer (not shown), the Right Base (not
shown), and the Right post (not shown).
9
6
43
43
2
1
40
38
43
4
3
10. Insert the Right Base (51) into the Left Base
(2). Insert an M10 x 65mm Carriage Bolt (42)
up through the Left and Right Bases. Next,
tighten the Base Knob (31) onto the Carriage
Bolt.
10
51
31
42
2
11. Attach a Tray (18) to a Tray Support (10) with
two M8 x 45mm Bolts (39) and two M8 Nylon
Locknuts (43). Next, insert the
T
ray Support
(10) into the Left Upright (8).
Repeat this step for the other side of the
weight rack.
11
39
18
10
43
43
8
12. Make sure that all parts are properly tight-
ened before you use the weight bench and
the weight rack. The use of all remaining
parts will be explained in ADJUSTMENTS
on page 10.