User's Manual

8
6. Attach the Seat (17) and the Seat Carriage
(11) to the Seat Frame (5) with two M6 x
1
5mm Screws (48), two M6 x 35mm Screws
(49), and two M6 Washers (44).
7. Insert the Backrest Bracket (14) into the Bench
Frame (4). Apply a portion of the included
grease to an M10 x 180mm Bolt (32). Attach
the Backrest Frames (15) and the Seat
Carriage (11) to the Bench Frame with the
Bolt, two M10 Washers (45), and an M10
Nylon Locknut (34).
Do not overtighten the
Nylon Locknut; the Backrest Frames and
the Seat Carriage must pivot freely.
Tighten the Backrest Knob (28) into the Bench
Frame (4). Make sure the Backrest Knob
engages a hole in the Backrest Bracket
(14).
Tighten the M8 Nylon Locknuts (43) used in
step 4 and the M6 x 55mm Screws (35)
used in step 5.
8. Insert the Seat Pin (29) into the Seat Frame
(5) and through the Bench Frame (4).
6
17
11
4
4
49
48
5
11
34
45
45
32
15
14
28
4
7
8
4
29
5