User's Manual

8
6. Attach the Seat (17) and the Seat Carriage
(11) to the Seat Frame (5) with two M6 x
15mm Screws (48), two M6 x 35mm Screws
(49), and two M6 Washers (44).
7. Insert the Backrest Bracket (14) into the
Bench Frame (4). Apply a portion of the
included grease to an M10 x 180mm Bolt
(32).
Attach the Backrest Frames (15) and the
Seat Carriage (11) to the Bench Frame with
the Bolt, two M10 Washers (45), and an M10
Nylon Locknut (34). Do not overtighten the
Nylon Locknut; the Backrest Frames and
the Seat Carriage must pivot freely.
Tighten the Backrest Knob (28) into the
Bench Frame (4). Make sure that the
Backrest Knob engages a hole in the
Backrest Bracket (14).
Tighten the M8 Nylon Locknuts (43) used
in step 4 and the M6 x 55mm Screws (35)
used in step 5.
6
17
11
44
49
48
5
1
1
34
45
45
32
15
14
28
4
7
5. Attach the Backrest (16) to the Backrest
Frames (15) with four M6 x 55mm Screws
(
35) and four M6 Washers (44).
D
o not tight-
en the Screws yet.
44
35
44
35
5
16
15