Instructions / Assembly

6
ASSEMBLY
1.
Orient the Front Stabilizer (29) so that the warn-
ing decals are facing upward.
Attach the Front Stabilizer (29) to the Front Leg
(2) with two M10 x 63mm Carriage Bolts (18)
and two M10 Locknuts (19). Do not tighten the
Locknuts yet.
2. Attach the Front Leg (2) to the Frame (1) with
two M10 x 63mm Bolts (16), two M10 Large
Washers (27), and two M10 Locknuts (19). Do
not tighten the Locknuts yet.
1
2
19
19
Warning
Decals
18
2
1
19
19
16
27
27
2
29
To make assembly easier, read the
assembly tips in the box above.
•
To hire an authorized service technician to
assemble the weight bench in your home, call
1-800-445-2480.
•
Assembly requires two persons.
• Because of its size and weight, assemble the
weight bench in the location where it will be
used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove
the packing materials. Do not dispose of the
packing materials until you complete all
assembly steps.
•
To identify small parts, see page 5.
• The following tools (not included) may be
required for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.