User's Manual

15
22. Identify the Butterfly Cable (31). Grease an M8
x 43mm Shoulder Bolt (107) with grease. Attach
t
he Cable to the Left Butterfly Arm (57) with the
Shoulder Bolt, an M10 Small Washer (95), and an
M
8 Nylon Locknut (17).
24. Wrap the Butterfly Cable (31) under a Pulley (87).
Attach the Pulley and two Half Pulley Guards
(109) to the Double “U”-bracket (81) with an M10
x 48mm Bolt (33) and an M10 Nylon Locknut
(34).
23. Wrap the Butterfly Cable (31) over a “V”-pulley
(86). Attach the “V”-pulley, a Large Cable Trap
(103), and two Full Pulley Guards (110) to the
bracket on the Center Upright (45) with an M10 x
63mm Bolt (105) and an M10 Nylon Locknut (34).
Make sure that the Large Cable Trap is orient-
ed to hold the Cable in the groove of the “V”-
pulley.
25.
W
rap the Butterfly Cable (31) over a “V”-pulley
(86).
Attach the “V”-pulley, a Large Cable T
rap
(103), and two Full Pulley Guards (110) to the
other side of the bracket on the Center Upright
(45) with an M10 x 63mm Bolt (105) and an M10
Nylon Locknut (34). Make sure that the Large
Cable Trap is oriented to hold the Cable in the
groove of the “V”-pulley.
22
107
Grease
17
95
31
57
23
31
103
34
45
25
86
105
31
34
45
24
87
31
81
33
34
86
105
110
109
1
10
1
10
109
110
103