User`s manual

36. Wrap the Leg Lever Cable (51) under a 90mm

Pulley (48). Attach the Pulley to the Right Press

Arm (16) with an MIO x 50mm Bolt (97), two Half

Guards (55), a Cable Trap (56), an MIO Washer

(80), and an MIO Nylon Locknut (77). Make sure

the Cable Trap and Half Guards are oriented

as shown.

37. Wrap the Leg Lever Cable (51) around a "V'-pul-

ley (47). Attach the Pulley to the Upright (2) with

an MIO x 70mm Bolt (119), two Half Guards (55),

an MIO Washer (80), a Long Cable Trap (57),

and an MIO Nylon Locknut (77). Make sure the

Cable Trap and Half Guards are oriented as

shown.

38. Wrap the Leg Lever Cable (51) around a 90mm

Pulley (48). Attach the Pulley to the Left Press

Arm (15) with an MIO x 50mm Bolt (97), two Half

Guards (55), an MIO Washer (80), and a Cable

Trap (56). Make sure the Cable Trap and Half

Guards are oriented as shown.

55 80

55 77