User`s manual

12. Apply grease to the locations shown and attach
the Left Butterfly Bracket (28) to the Butterfly
Frame (5) with an MIO x 80mm Bolt (84) and an
MIO Nylon Locknut (77).
Repeat this step for the Right Butterfly
Bracket (29).
Tighten the Nylon Locknuts (77, 78, 107) used
in steps 2-12.
13. Attach a Butterfly Handle (27) to the Left Butterfly
Arm (25) with an MIO x 65mm Button Bolt (106),
two MIO Washers (80), two 13mm Steel Spacers
(10% and an MIO Nylon Locknut (77).
Secure the Left Butterfly Arm (25) with an MIO x
82mm Button Screw (92) and an MIO Large
Washer (105).
Repeat this step for the Right Butterfly Arm
and Butterfly Handle (26, 27).
14. Apply grease in the locations shown and attach
the Right Butterfly Arm (26) to the Right Butterfly
Bracket (29) with an MIO x 75mm Bolt (82) and
an MIO Nylon Locknut (77). Press a Bolt Cap
(44) onto the end of the Bolt. Do not overtighten
the Bolt; the Butterfly Arm must be able to
pivot freely.
Repeat this step for the Left Butterfly Arm (25).
12
13
14
84
27_
26
25
109
109
27
Grease
44 29
13