User's Manual

5
5
5. Attach a “U”-channel Extension (4) to a “U”-chan-
nel (D) with two 1/4” x 1/2” Flat Head Screws (7).
Attach the other “U”-channel Extension (4) to
the other “U”-channel (D) in the same manner.
6. Make sure that all parts have been properly tightened. To use the POWER PAK to add resistance, see
ADJUSTING THE RESISTANCE in the CrossBar by WEIDER™ userʼs manual.
D
7
4
4. Attach the Cover Plate (3) to the Tray (B) with the
two Button Head Screws (C) that were removed
in step 3. Note: Make sure the decal is over the
i
ndicated resistance bars
4
B
Decal
Resistance
Bars
3
C