Safety data sheet

Safety Data Sheet according to Regulation (EC)
No. 1907/2006 (REACH)
Printed 06.01.2016
revision 12.08.2015 (GB) Version 8.4
Anti-Seize ASW High-Tech Assembly Paste
WEICON GmbH & Co. KG Königsberger Straße 255 D-48157 Münster / Federal Republic of Germany Page 5/9
Ingredients with occupational exposure limits to be monitored (continued)
CAS No Name Code [mg/m3] [ppm] Remark
13463-67-7 Titanium dioxide: respirable dust 8 hours 4 EH40/2005
Additional advice
The statutory local and national regulations have to be observed.
8.2. Exposure controls
Respiratory protection
Not required
Hand protection
In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the
gloves.
Not suitable: leather gloves
Not suitable: gloves made of thick material
Glove material specification [make/type, thickness, permeation time/life, wetting resistance]:: Nitrile rubber; 0,4mm;
480min;60min.
Chemical protective gloves must be chosen carefully in view of their design and depending on the dependence on the
concentration and amounts of dangerous goods used in the specific working tasks.
Eye protection
tightly fitting goggles
Other protection measures
protective clothing
Appropriate engineering controls
Sufficient ventilation and exhaustion.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
pasty
Colour
white
Odour
hardly noticeable
Odour threshold
not determined
Important health, safety and environmental information
Value Temperature at Method Remark
pH value
not determined
boiling point
not determined
melting point
not determined
Flash point
> 200 °C ISO 2592 basic oil
Vapourisation rate
not determined
Flammable (solid)
not determined
Flammability (gas)
not determined
Ignition temperature
not determined