Datasheet

Technical Datasheet
Create Date: 16.11.2017 - Seite 1/1
Note
The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application
conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical
tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications.
WEICON GmbH & Co. KG
(Headquarters)
Germany
phone +49 (0) 251 9322 0
info@weicon.de
WEICON SA (Pty) Ltd
South Africa
phone +27 (0) 21 709 0088
info@weicon.co.za
WEICON Middle East L.L.C.
United Arab Emirates
phone +971 4 880 25 05
info@weicon.ae
WEICON South East Asia Pte Ltd
Singapore
phone (+65) 6710 7671
info@weicon.com.sg
WEICON Inc.
Canada
phone +1 877 620 8889
info@weicon.ca
www.weicon.ca
WEICON Czech Republic s.r.o.
Czech Republic
phone +42 (0) 417 533 013
info@weiconcz.cz
WEICON Kimya Sanayi Tic. Ltd. Şti.
Turkey
phone +90 (0) 212 465 33 65
info@weicon.com.tr
www.weicon.com.tr
WEICON Ibérica S.L.
Spain
phone +34 (0) 914 7997 34
info@weicon.es
WEICON Romania SRL
Romania
phone +40 (0) 3 65 730 763
office@weicon.com
Hand Protective Foam
waterproof
provides lasting protection
WEICON Hand Protective Foam forms a grease-free, invisible and
waterproof protective film which prevents the most diverse types of
contaminants from penetrating the skin and pores. This „invisible
glove“ protects against contaminants and irritants from aggressive
chemical substances. The usage of liposomes greatly improves the
care effect.
WEICON Hand Protective Foam can be used in many sectors.
Technical Data
Odour odourless
Features with liposomes
Storage stability 24 months
Colour white
ISSA-Code 53.402.16
IMPA-Code 45 08 36
Processing
Before starting to work, spray the foam onto the hands and rub
it in, not omitting the finger tips and nail beds. Leave it on for 2
minutes until it forms a waterproof and invisible protective film free
of grease. It prevents residues of lubricants and soiling of the most
different kinds from penetrating skin and pores. After work, the dirt
can be washed off very easily with warm water. Only in cases of
heavy soiling, use additional cleaning agents.
WEICON Hand Protective Foam has been dermatologically tested.
Storage
Pressurized container: protect from sunlight and do not expose to
temperatures exceeding +50°C.
Safety and health
When using WEICON products, the physical, safety technical,
toxicological and ecological data and regulations in our EC safety
data sheets (www.weicon.com) must be observed.
Available sizes:
11850200 Hand Protective Foam 200 ml

Summary of content (1 pages)