Safety data sheet

Safety Data Sheet according to Regulation (EC)
No. 1907/2006 (REACH)
Printed 08.01.2016
revision 31.08.2015 (GB) Version 8.3
Repair Stick Wood
WEICON GmbH & Co. KG Königsberger Straße 255 D-48157 Münster / Federal Republic of Germany Page 5/9
Advice on protection against fire and explosion
Pay attention to general rules of internal fire prevention.
7.2. Conditions for safe storage, including any incompatibilities
Requirements for storage rooms and vessels
Keep in closed original container.
Advice on storage compatibility
Do not store together with acids.
Do not store together with oxidizing agents.
Further information on storage conditions
Protect from direct solar radiation.
Store container at cool and aired place.
Store in a dry place.
Protect from heat/overheating.
7.3. Specific end use(s)
Recommendation(s) for intended use
See section 1.2
! SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Ingredients with occupational exposure limits to be monitored
CAS No Name Code [mg/m3] [ppm] Remark
14807-96-6 Talc respirable dust 8 hours 1 EH40/2005
Additional advice
The statutory local and national regulations have to be observed.
8.2. Exposure controls
Respiratory protection
In case of insufficient ventilation or long-term effect use breathing apparatus.
!
Hand protection
In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the
gloves.
Glove material specification [make/type, thickness, permeation time/life, wetting resistance]:: Nitrile rubber; 0,4mm;
480min;60min.
Chemical protective gloves must be chosen carefully in view of their design and depending on the dependence on the
concentration and amounts of dangerous goods used in the specific working tasks.
Eye protection
tightly fitting goggles
Other protection measures
protective clothing
Appropriate engineering controls
Sufficient ventilation and exhaustion.