Safety data sheet

Safety Data Sheet according to Regulation (EC)
No. 1907/2006 (REACH)
Printed 25.02.2016
revision 25.02.2016 (GB) Version 8.3
Repair Stick Copper
WEICON GmbH & Co. KG Königsberger Straße 255 D-48157 Münster / Federal Republic of Germany Page 6/11
PNEC
CAS No Substance name Value Code Remark
25068-38-6 reaction product: bisphenol-A-
(epichlorhydrin) epoxy resin (number
average molecular weight <= 700)
10 mg/l PNEC sewage treatment plant (STP)
0,0006 mg/l PNEC aquatic, marine water
0,0996 mg/kg PNEC sediment, marine water
0,006 mg/l PNEC aquatic, freshwater
0,996 mg/kg PNEC sediment, freshwater
7440-50-8 copper 230 µg/l PNEC sewage treatment plant (STP)
7,8 µg/l PNEC aquatic, freshwater
5,2 µg/l PNEC aquatic, marine water
676 mg/kg PNEC sediment, marine water
87 mg/kg PNEC sediment, freshwater
90-72-2 2,4,6-Tri-(dimethylaminomethyl)phenol 0,084 mg/l PNEC aquatic, freshwater
0,2 mg/l PNEC sewage treatment plant (STP)
0,0084 mg/l PNEC aquatic, marine water
Additional advice
The statutory local and national regulations have to be observed.
8.2. Exposure controls
Respiratory protection
In case of insufficient ventilation or long-term effect use breathing apparatus.
!
Hand protection
In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the
gloves.
Glove material specification [make/type, thickness, permeation time/life, wetting resistance]:: Nitrile rubber; 0,4mm;
480min;60min.
Chemical protective gloves must be chosen carefully in view of their design and depending on the dependence on the
concentration and amounts of dangerous goods used in the specific working tasks.
Eye protection
tightly fitting goggles
Other protection measures
protective clothing
Appropriate engineering controls
Sufficient ventilation and exhaustion.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
pasty
Colour
copper-coloured
Odour
hardly noticeable
Odour threshold