User`s manual

Network Camera User’s Manual
42/53
Motion Detection
“Enable motion detection” You can enable or disable motion detection function
“Windows 1 ~ Windows 4” Click on this option to add a window. Up to four windows
can exist simultaneously. Use the mouse to drag the border of the window to resize or
click the title bar to move.
“Threshold” This sets the space ratio of moving objects in the monitoring window.
“Power” It is the strength of the motion detection.
“Sensitivity” This sets the endurable difference between two sequential images.
Higher sensitivity and small threshold will allow easier motion detection.
Note: 1. If select internet mode, the overall performance of Network Camera will be
degraded, and the frame rate may be reduced.
2. When alarm was enabled, user can send the captured images to the pre-set E-Mail or
FTP server.
A small detection window will
be pop-up as soon as you
check Window1~Window4.
You can enlarge the pop-up
window and move it to the area
where you want to detect.