User`s manual

Network Camera User’s Manual
30/53
WLAN Configuration (Wireless Model Only)
WLAN configuration (Wireless model only)
“SSID” (Service Set Identifier), it is to identify a wireless network. Access Points and
wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network)
must use the same SSID. The default setting is default. Note: The maximum length of
SSID is 32 single-byte characters and SSID can’t be any of “, <, > and space character.
“Wireless mode” Click the down arrow to select one from options:
1. “Infrastructure” The Network Camera connects to the WLAN via an Access Point.
(The default setting)
》“TX rate” This field is for selecting the maximum transmission rate on the network.
The default setting is “auto”. It means the Network Camera will try to connect to the other
wireless device with highest transmitting rate.
》 “Security” Select the data encrypt method
》 “None” – No data encryption.
》 “WEP” – allows communication only with other devices, which are with identical
WEP settings.
identical WEP settings.