User`s manual

Network Camera User’s Manual
26/53
System parameters
“Host name”
The text displays the title on the top of the main page.
“Description” The text displays the description of the camera.
“Turn off the LED indicator” Check this option to turn off the LED indicators. It can
prevent the camera’s operation being noticed.
“Language Selection” Click this to select language English / Chinese of the Network
Camera.
“Daylight saving” Summertime; It will be one hour ahead.
“Keep current date and time”
Click on this to keep the current date and time of the
Network Camera. An internal real-time clock maintains the date and time even when the
power of the system is turned off.
“Sync with computer time” Synchronize the date and time in the Network Camera
according to the local computer.
“Manual” Adjust the date and time by the Administrator.
“Automatic” Synchronize the time according NTP server over the Internet whenever
the Network Camera is switched on. It fails if the assigned time-server cannot be found.
》“NTP server” Assign the IP address or domain name of the time-server. Leaving the
text box blank connects the Network Camera to the default time-servers.
》“Time zone” Choose a time zone from the down arrow
》“Update interval” Select 0 ~ 23 hours update with the time on the NTP server.
Remember to click on “Save” to immediately validate the changes. Otherwise, the
correct time will not be synchronized.