User`s manual

Network Camera User’s Manual
16/53
Initial Access to the Network Camera
(1) For the initial access to the Network Camera in Windows, the web browser may
prompt for permission to install a new plug-in for the Network Camera. Permission
request depends on the Internet security settings of the user’s PC or notebook. If the
highest security level is set, the computer may prohibit any installation and execution
attempt. This plug-in has been registered for certificate and is used to display the
video in the browser. Users may click on
to proceed. If the web browser
does not allow the user to continue to install, check the Internet security option as
below steps.
Choose ToolsÆInternet OptionsÆSecurityÆCustom level
ÆCheck “Enable” or “Prompt” at Download unsigned ActiveX controls setting
ÆClick ok and then refresh the webÆClick “Install” and “Run” ActiveX controls