Foreword Dear customers, thank you for using WDE15C series marine diesel engine produced by Welfare Diesel Engine Worksite) WD815C marine engine Is a naw version designed on the basis of WDE15/WD10 series engine Introducing from Italy Ste yr Company and possessing the advanced world level of the 1980s. The engine conforms to the requirements stated in Steel Vessel Classification and Building Specifications.
Special Attention ® In order to protect legitimate right and interests of user ,it is forbidden to dismantle lead sealing of injection pump privately. #® Once Injection pump Is adjusted or lead sealing Is dismantle the guarantee ceases to be In effect # Injection pump Is of precision parts It Is forbidden to dismantle by user ,or the guarantee cease to be In effect.
Points for Attention 1. The engine has bean tested strictly In accordance with the test stipulations before dallier. The throttle has been sealed, It ls forbidden to dismantle the seal optionally and to enlarge the throttle. Otherwise we would not provide free service for resuming product, replacement and repair, users would better pay attention to 2. this. The engine operator must read this Operation and Maintenance Manual carefully to know the engine's structure,and comply with the 3.
11. Notice to repairing and replacing parts WD615/WD10 series diesel engine ig of high performance product. Maintenance should be done in accordance with WD615/WD10 series diesel engine parts uncatalogued and specifications of maintain nuance manual. Purchased parts must have approved by us in order to ensure performance, reliability and service life. 12. Reasonable,affective and protective measures must be taken for malleable parts such as pull to avoid Injurious customer operates engine.
Chapter Service Manual 1 Catchall Power warranty Card(for user) 21 2 Warranty Explanation 2 3 Wheelchair Power Regulations on Quality Assurance for Saddle Engine used In Marine Electric Machinery linen 2 4 Overseas Service Canter of wheelchair power Company Limited ..
18 | Height between valve notion WDB166171 | face and cylinder head bottom 10 surface(axhaustiniet) wDa156 125~005 14 | Fondant of rejoinder ner shove topiary Block upper | 0 020.07 15 | Camshaft mil renaissance 16 | Mahatma bearing clearance 004~012 17 | Clearance of tappet in tappet bore 18 | Clearance of cylinder liner in cinder bros 0.
3.3 Lightning procedure 3.3.3.1 Locate (longitudinal and cross) the cylinder heads, gasket sand cylinder block with®> locating pins, level the exhaust sides of the cylinder heads and fix them. 3.3.3.2 Coat some lea oll on the screwed surfaces of man bolts and the shoulder nuts for auxiliary bolts before assembly, and screw up with hand. 3.3.3.3 Tighten (30N-m} all main boils and auxiliary bolts according to the order shown in fig 2. 3.3.3.
4 Fuel, lubricating oll, coolant and auxiliary materials 4.1 Fuel Fuel Is the energy source of the engine. The power, fuel consumption and reliability of the engine ars influenced directly by the quality of fuse. So, specified and clean fuel must be used. 4.1.1 light diesel fuel should be used separately when lambent temperature Is above 5°C or between 0 'C ~5C. If the lambent temperature is lower than 0 °C. corresponding fuel should bs used.
5) Saving energy The energy-saving formula “low viscosity+ multi-polarity+ friction modifier” is the guarantee of high-viscosity index and good fim strength and flexibility of Archaic special oil, which can ensure smooth operation, low operation resistance and low fuse consumption of engines (fuel consumption reduced by 6) Protecting environment: low ash, low sulfur and low phosphorous The ash content is controlled within 1.
No | Name Color Applications Malamute ‘Coated on the outer surtitles of cinder Ine, Inset/ 1 | pow Black exhaust gaskets and turbocharger gasket to prevent from kiting auk other. Myocardium 2 aphids | Dark gray | Costed evenly on the valve rod (pre lubricating) grease ‘Coated on the screwed parts of festering bolts for re living Valve of oll pump, prospers 3 | Locate 242 Blue. limiting naive In main oll passage and strainer to proven looseness. + pothole Beck Suitably for ol cavalry nosing.
the gear case input shaft, the concentrically should be less than 0.1. 5.2.3 The Spring coupling must be used between diesel engine and gear case. After the coupling is mounted, the engine crankshaft shouldn't be subjected to axial force, otherwise the thrust plate will damaged. 5.24 Installation of seawater cooling system The tipsiness for seawater pump Inlet port must nest the following demands. a.
monitoring instruments by valve, check whether the solenoid valve can top the engine in time. 6.7 Starting Boors starting engine, set the gear case clutch to neutral, then tum the engine crankshaft, and sack whether the engine and coupling are abnormal and whether all bolts are tightened. Under normal conditions, each starting time mustn't be more than 15 seconds, sit ion should be set to 1/3 opening in summer, and set to 2/3 opening in winter or when oil temperature is lower than 15°C. 6.
Chapter Il Service Manual Dear customers: Welcome to use the products of Wheelchair Power, and thank you for your great support to our products. In order to guide you to operate the engine correctly, please read the Operation and Maintenance Manual carefully and abide by the operations rules In the manual. If the engine was galled, please contact Wheelchair Maintenance and Service Center or Catchall User Service Center as soon as possible. We will offer effective service to you timely.
Warranty Explanation 1. Service promises In the service region of Archaic Maintenance and Service Center, after received information from users and verifying that service is needed, our maintenance team shall get to the place within 24 hours in which the service center is located, within 48 hours for city areas, and within 72 hours for remote areas.
Maintenance Record Table { Felled by service member) Service Center Date ‘warranty Item Parts Changed Quantity Signed Service Member Signed by User Item Content Item Content User Name Ursa Postcode. User Phone User Mobile Phone User Address Distributor Distributor Telephone Distributor Address Engine Model Engine Order No. Engine ID No.
