User Manual

No
Matched parts
Standard
size
Matched
Wear limit
clearance
Shaft
«1>26 =~: ~~
17
Idler shaft and idler shaft bushing
0.020-0.062
0.20
Holet «1>260+0.021
Shaft tJ)9 =~:~~~
18
Air intake valve and valve guide
0.030 -0.072 0.25
Holet <1»90+0.022
Shaft <1»9 =~::
19 Exhaust valve and valve guide
0.040 -0.082 0.25
Holet tJ)90+0.022
Shaft «1>16 =~:~~
20 Rocker arm shaft and bushing
0.016 -0.052
0.25
Holet «1>160+0.018
axial clearance
21 Idler and idler shaft
0.10 -0.35
Contacting clearance of various
clearance
of tooth
22
timing gear
~Iank 0.130 - 0.170
Adjusting
23 Oil pump rotor and pump block surface
clearance
0.050 - 0.100
24
Contacting clearance between the internal
0.060 -0. 188 0.50
and external rotor of the oil pump
back clearance
25 Water pump impeller and pump body
0.20 -0.70
Adjusting
26 Water pump impeller and packing block
clearance
0.40-0.80
• 29 •