Use and Care Manual

2
objects to be avoided during work, such as sprinkler heads, water valves, buried cables, or
clothes line anchors etc. Do not use the machine if it has been modified or improperly
maintained.
All jobsites are different. Please ensure that when using the WEIBANG sod cutter, all local
bylaws and codes are followed. All operators and mechanics of this machine should be trained in
general machine use and safety.
Every care and effort has been made to ascertain the accuracy and completeness of
procedures described in this document to ensure your enjoyment and satisfaction. If you have
any questions or concerns, please contact the WEIBANG’S local dealer or WEIBANG’s exclusive
national distributor.
Specifications
Model
WBSC457LC
Power LONCIN G200F 4.1kW 6hp
Cutting depth(Max.) 1.8 inches 4.5 cm
Cutting width 18 inches 45cm
Cutting speed 0.9-1.1m/s
machine size LxWxH 69x29.5x37.4 inches 175x75x95cm
Net weight 387 Pound 176 Kg
Gross weitht 440 Pound 200 Kg
SAFETY REGULATIONS
1.
This machine may only be operated by responsible persons, who are trained and familiar with
the operating instructions. Before starting to use this machine, read, under stand and follow all
instructions that are provided in this manual.
2．
Before operating power rake, ensure that it is structurally and mechanically safe by checking
the following:
a. Are all engine controls and the clutch action functioning within acceptable tolerances?
b.Are all nuts and bolts in good working condition? Tight and keep all guards and deflectors
in place and in good working condition.
3.
Before using the sod cutter on proposed jobsite, perform the following environmental checks:
a. Inspect the entire work area for unexpected buried hazards, such as boulders,
foundations, and fencing.
b. Clean work area of any litter or debris, such as wire, boards, rocks, or any other potential
hazards.