Use and Care Manual

21
Manual for Engine
Gear box Replace oil
√ 200
hours
Wheels Lithium-based
Grease
√ √ √ √
Handle
Attachment
Kits
General Purpose
Spray Lubricant
√ √ √ √
Blade &
Rotor
General Purpose
Spray Lubricant
√ √ √
Linkage General Purpose
Spray Lubricant
√ √ √ √
Zerks General Purpose
Spray Lubricant
√ √ √
Blade
control
group
General Purpose
Spray Lubricant
√ √
Technician should read and thoroughly understand all manuals pertaining to
the machine to be serviced. Do NOT proceed with any service and maintenance activity
until ALL questions and concerns have been addressed. Please call your local dealer for
technical support and advice.
ALWAYS consult and verify that all local codes and bylaws are followed before
performing any service or maintenance procedures.
10.3 General Service Procedures
10.3.1General safety procedures
Before performing any service and maintenance procedures, consult these general safety
procedures for a safe working environment.
1.
Make sure that both the engine and sod cutter are cool prior to any service or maintenance
work.
2.
Verify that work area is clean and free of any debris, tripping or fi re hazards, and other
potential sources of danger.
3.
Always wear proper safety clothing and equipment for the job. These can and should include
eye and ear protection, gloves, dust mask and any other items that are appropriate for the job and
jobsite requirements.
4.
Ensure that the technician has tied back or remove any loose hair, clothing and any other
potential hazards and obstructions
5.
Disconnect spark plug.
The following are general guidelines for servicing common wear components on the
WBSC457LC sod cutter. ALL MAINTENANCE AND SERVICE WORK MUST BE PERFORMED
Item Suggested
Lubricant
Every 20
hours
Every 60
hours
As
required
After each
Pressure wash
Storage
Engine Refer to Owner's
√