Parts and Accessories List

5
.
E
l
e
c
t
r
o
m
a
g
n
e
t
i
c
c
o
m
p
a
t
i
b
i
l
i
t
y
i
n
f
o
r
m
a
t
i
o
n
Table 4. Recommended separation distances between portable and mobile RF communications equipment and the TS200
Rated maximum output
power of transmitter
W
For transmitters rated at a maximum output power not listed above, the recommended
separation distance
d
in metres (m) can be estimated using the equation applicable to
the frequency of the transmitter, where
P
is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
NOTE 2
These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and reflection from structures, objects and people.
0,01
0,1
1
10
100
N/A
N/A
N/A
N/A
N/A
0,12
0,38
1,2
3,8
12
0,23
0,73
2,3
7,3
23
Separation distance according to frequency of transmitter m
P
50 kHz to
80 MHz
d = 1,2
P
80 MHz to 800
MHz
d = 1,2
P
800 MHz to 2,5
GHz
d = 2,3
The TS200 is intended for use in an electromagnetic environment in which radiated
RF disturbances are controlled. The customer or the user of the TS200 can help
prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the TS200 as
recommended below, according to the maximum output power of the
communications equipment.
-19-