Specifications

Broadcast Tools, Inc.
DSC-20, Dual Satellite Receiver Controller Set-up guide
Specifications
Logic / memory: Microprocessor, Non-Volatile memory.
J-1, “CONTROL”
Input connector: 25 pin Male D-sub, mating connector/shell supplied.
Inputs, CMOS, TTL compatible, 5-volt logic, active
low.
J-3, Power connector: 2.1mm, coaxial 9 volt AC, 500 ma. /w Green LED.
Wall (Wart) transformer supplied.
J-5, “COMPUTER” connector: RJ-11, (6P4C).
Data rate, “COMPUTER” port: 9600- 8N1, RS-232c or RS-485.
J-7, “RECVR 1” connector: RJ-11, (6P4C)
J-8, “RECVR 2” connector. RJ-11, (6P4C).
Date rate, “RECVR” ports: 9600-8N1, RS-232c. w/ Red LED data indicator.
Dimensions: 7.75” x 4.0” x 1.25” with four # 6 mounting
holes.
Weight: 2.0 pounds.
Options: RM-2 rack panel holds two units (3-RU’s)
RM-3 rack shelf holds two units (1-RU)
SDD-8, Serial Data (Router) Director
Installation and Operation Manual
Broadcast Tools, Inc.
Page 18