Specifications

Stream Statistics
STREAM STATISTICS
-------------------------------------
Eastern Time: 12:53 06/18/08
Permed Streams: 6
This shows the time the report was generated and the number of permissioned streams (live
programs or DVB streams from the Wegener
®
system). The time is in Eastern Time, because
stream permissions are given according to Eastern Time, because most networks and live
programs use that as their standard. The exact live streams the AMR-100 is getting are listed
in the Amb-OS Utility Software. Please see that manual for further details.
Eastern Time: The time the report was generated
Permed Streams: The number of streams, either live or from the Wegener
®
system the
receiver has permissions to air
Target Mapping
TARGET MAPPING SETTINGS
-------------------------------------
TMAP0: None (*** Future firmware revision)
TMAP1: Stereo 1 (T1)
TMAP2: Stereo 2 (T2)
TMAP3: Mono 1 Left (T1L)
TMAP4: Mono 1 Right (T1R)
TMAP5: Mono 2 Left (T2L)
TMAP6: Mono 2 Right (T2R)
Target Maps (TMAP) allow the AMR-100 to use a different physical output for the same
name. Live streams can send a program to a TMAP number and the station can have the
program come out their port or target. TMAP0 is reserved for special or emergency
broadcasts. See the TMAP Command under the HTML Command Interface section.
Audio Statistics
AUDIO STATISTICS
-------------------------------------
Playing Audio: NO
Audio IRQs: 3060454
Playing Audio reports whether audio is playing out a port.
Audio IRQs (Interrupt Requests) count the number of times the audio playback system
requested an interrupt from the process.
Ethernet Statistics
ETHERNET STATISTICS
-------------------------------------
Connections: 1
IP Datagrams: 236
IP Fragments: 0
Connections show the number of units connected to the Ethernet port on the receiver.
IP Datagrams count the number of IP packets coming to the AMR-100.
IP Fragments are the number of packets that were incomplete in the network and
coming to the AMR-100
Rev. 36 – Firmware version 1.61 47
©
2008