Specifications

The menu in the middle has the following:
General Diagnostics has:
System Statistics
Scheduled Event List
Trigger Event Lists
Command Interface
Satellite Diagnostics has:
1-Minute Receiver Summary
15-Minute Receiver Summary
General diagnostics
System Statistics
This shows the settings of the receiver. They are the same as the listings described in the
FRONT PANEL section.
General Statistics:
GENERAL STATISTICS
-------------------------------------
Firmware Ver: 1.61
TID: 2000000
Processor Speed: 600Mhz
Bus Speed: 120Mhz
Ethernet Addr: 00a0e12e8480
DHCP: No
IP Address: 10.100.0.133
Netmask: 255.255.255.0
Gateway: 10.100.0.254
Server 1: 72.159.94.35:25000
Server 2: 72.159.94.36:25000
Free Memory: 19506176
Time: 16:26 10/18/07
Zone: Mountain
DST: YES
Time Running: 1:37
Description of items:
Firmware Ver gives the current firm level of the operating system
TID is the AMR-100’s ID number or serial number
Processor Speed is the speed of the processor
Bus Speed is the speed of the data/address bus
Ethernet Addr is MAC address of the AMR-100
*DHCP describes is the IP address is selected automatically
*IP Address is the internal network address of the AMR-100
*Netmask is the network mask
*Gateway is the address of the Internet gateway of your internal network
Server 1 is the address:port of the primary AMB-OS uplink server
Server 2 is the address:port of the secondary AMB-OS uplink server
Free Memory describes the amount of unused internal memory for the operating system
*Time is the time (without seconds) and the date
*Zone is the time zone
*DST is whether Daylight Saving Time is in effect or not
Rev. 36 – Firmware version 1.61 44
©
2008