Specifications

HTML INTERFACE
Access to the AMR-100 Web page
To access the receiver remotely, you need to have it connected to your internal Ethernet
network.
Open an Internet browser window and enter the IP Address of the receiver into the address
line of the browser. Your IP Address was set at the beginning of the installation. However, if
you do not remember what that was, go to the AMR-100 and press the [DOWN] arrow and it
will be next to the IP Addr: line.
Firmware: 1.61
Serial No: 2001000
IP Addr: 192.168.1.100
Receiver Utilities
1. Open your default browser
2. Enter the IP Address of the receiver (for this example it is 192.168.1.100)
3. Press GO on the address line of the browser
You will get the following screen:
Rev. 36 – Firmware version 1.61 43
©
2008