Specifications

*Target Map
This menu allows you to change a target map to any of the analog targets. The default
mappings are:
TMAP1 = T1 (stereo)
TMAP2 = T2 (stereo)
TMAP3 = T1L (mono)
TMAP4 = T1R (mono)
TMAP5 = T2L (mono)
TMAP6 = T2R (mono)
To access the target menu:
General instructions:
1. [ENTER] changes the mapping of the highlighted Target Map
2. [BACK] goes to the previous menu and saves the settings
3. [UP] and [DOWN] moves between the Target Maps
Changing settings:
1. Press [ENTER] twice to enter the edit mode of the front panel settings (the Firmware
X.XX should be highlighted
2. Press [DOWN] until Target Map is highlighted
3. Press [ENTER] to edit the target map and highlight TMAP1
4. Press [ENTER] to change the mapping
5. Press [UP] or [DOWN] to move to the next Target Map
6. Press [BACK] to save your setting
Rev. 36 – Firmware version 1.61 37
©
2008