Specifications

*Port2: 25000 This is always 25000. If you change this port number, your receiver will not
communicate with the main AMB-OS server at the uplink site.
1. Press [ENTER] to select 2
2. Press [UP] or [DOWN] to change the digit to the desired value
3. Press [ENTER] to move to the next one
4. Press [BACK] to return to a previous digit to correct it
5. Press [ENTER] to go to each digit. When you press [ENTER] at the last digit, it will
save your new port number and return to the IP Address submenu
*Server3: 72.159.94.36 This is the backup server to the main AMB-OS server at the uplink
site to retrieve missing data and does not need to be modified. Remember 1 and 2 digit
subnet addresses have leading 0’s (.002. for .2. and .030. for .30).
1. Press [ENTER] – First digit is selected
2. Press [UP] or [DOWN] to change the digit to the desired value
3. Press [ENTER] when have the number you want (it will move to the next digit)
4. Press [UP] or [DOWN] to select next digit
5. Press [BACK] to go back to the previous digit to correct it, if necessary
6. Do this for all 12 digits, then press [ENTER] to save and return to the IP Address
submenu
*Port3: 25000 This is always 25000. If you change this port number, your receiver will not
communicate with the main AMB-OS server at the uplink site.
1. Press [ENTER] to select 2
2. Press [UP] or [DOWN] to change the digit to the desired value
3. Press [ENTER] to move to the next one
4. Press [BACK] to return to a previous digit to correct it
5. Press [ENTER] to go to each digit. When you press [ENTER] at the last digit, it will
save your new port number and return to the IP Address submenu
*Server4: 209.169.52.44 This is the alternate Internet route to the backup server to the main
AMB-OS server at the uplink site to retrieve missing data and does not need to be
modified. Remember 1 and 2 digit subnet addresses have leading 0’s (.002. for .2. and .
030. for .30).
1. Press [ENTER] – First digit is selected
2. Press [UP] or [DOWN] to change the digit to the desired value
3. Press [ENTER] when have the number you want (it will move to the next digit)
4. Press [UP] or [DOWN] to select next digit
5. Press [BACK] to go back to the previous digit to correct it, if necessary
6. Do this for all 12 digits, then press [ENTER] to save and return to the IP Address
submenu
*Port4: 25000 This is always 25000. If you change this port number, your receiver will not
communicate with the main AMB-OS server at the uplink site.
1. Press [ENTER] to select 2
2. Press [UP] or [DOWN] to change the digit to the desired value
3. Press [ENTER] to move to the next one
4. Press [BACK] to return to a previous digit to correct it
5. Press [ENTER] to go to each digit. When you press [ENTER] at the last digit, it will
save your new port number and return to the IP Address submenu
Rev. 36 – Firmware version 1.61 31
©
2008