Specifications
OPERATIONS
Front Panel Description
Display
Input Closures Relay Output Closures
(no inputs closed) (no output relays closed)
Emergency Message Enabled: This indicates whether the AMR-100 will receive a broadcast
on TMAP0. This enables the AMR-100 to receive a special broadcast or if there is an
emergency broadcast for the entire network. To receive these broadcasts, TMAP0 must have
an assigned audio port and the “*” must be visible on the screen. The status of TMAP0 can
be seen with the other TMAPs when looking at the System Statistics from the HTML
Command Interface.
Closure Indicators: The small boxes at the top of the screen indicate a relay output closure or
input closure. The group of four boxes will display input closures and the group of six boxes
will display the output closures. A clear box means the input closure or output relay is open.
A black box means the input or relay is closed.
Audio Status Indicators: On power-up, there are two boxes under the relay indicators. They
are labeled St-1 and St-2. When clear, no audio is playing out the audio ports. When they
turn black, it means audio is coming out that port. The boxes split into two individual boxes
when two mono programs play out a port and they are labeled 1L and 1R or 2L and 2R.
Again, when clear, there is no audio and when black, there is audio.
Network/RF indicators: Under the audio status boxes are three boxes labeled: RF, Lan and
Inet. If you have a good RF signal, the RF box is black. If the Ethernet cable is connected to
a network, the Lan box is black. If the receiver can access the Internet and attach to the
uplink server, the Inet box is black. These functions will be discussed in detail later.
Rev. 36 – Firmware version 1.61 25
©
2008
Audio Status
(no audio playing)
Internet Connection
(connected to uplink
server)
Message Line
Emergency message
enabled
(***Future firmware)
Connection Status
RF Input
(RF good)
Ethernet
(connected to internal
network)
Audio Status
Audio port 1 is playing
different mono
programs out the
left and right
channels.
Audio Status
Audio port 2 is playing a
stereo program