Specifications

Audio
Analog
The analog audio connectors are standard XLR connectors. Remember, there are two stereo
ports or targets on the receiver. The output of these will be discussed in detail later, but each
of the two ports can be played in stereo (2 stereo ports), all mono (4 mono ports) or mixed (1
port stereo and the other 2 mono channels).
Left Right Left Right
Port 1 Port 2
XLR Pinout:
Pin 1: Ground
Pin 2: Lo
Pin 3: High
Digital
The digital connectors are labeled Port 1 and Port 2. There are three digital outputs for each
port, but they all will have the same audio on them as the analog Port 1. These digital outputs
are at 48K. Connect these to your digital equipment.
At this point, the receiver will receive programs and can play programs in timed events so you
can record the programs at the same time you get them currently.
Receiving Files
Remember, the receiver does NOT play out programs like a traditional receiver. Files are sent to
the receiver and then they must be scheduled to play or transferred. Please see the Amb-OS
Utility to do these things.
Send an email to [e-mail] with a list of the programs you want to receive. Include
your station call letters and receiver serial number.
Rev. 36 – Firmware version 1.61 20
©
2008