Specifications

RF with multiple receivers on a single splitter
If you have more than one Wegener receiver connected to your satellite antenna and have an
open position on an existing multiple port splitter, install the AMR-100 per the following
instructions:
1. Install the provided DC Block on the AMR-100 receiver’s RF connector.
2. Connect one of the provided RG-6 cables between the AMR-100 RF connector (with DC
Block installed) and an open port of your multiple port splitter.
Rev. 36 – Firmware version 1.61 18
©
2008
RF from
antenna
DC Block
DC Pass
1
Connect the DC
block to the
AMR-100
Connect one of the RG-6 cables to DC block on the
AMR-100
AMR-100
Out
In
Out
Out
Out
DC Block
Wegener
Unity 4000
2
AMR-100