Specifications

Front Panel Description
The front panel display gives the status of the receiver. The main screen shows relays, audio
output, and the status of the RF and Ethernet (see FRONT PANEL section).
Front Panel Buttons
To the right of the display are four buttons:
[UP] arrow [BACK]
[DOWN] arrow [ENTER]
The [UP] and [DOWN] arrow will change the display from its status screen to informational
and setup screens. Pressing [ENTER] will put you to a settings screen. Pressing the [UP] and
[DOWN] arrows will show you the current settings. Pressing [ENTER] will allow you to
change settings and [BACK] will return to the previous screen. It also will save any changes
you made.
Rev. 36 – Firmware version 1.61 14
©
2008