User`s manual

Unity 4650 User’s Manual
800034-01 Rev. A 80 wegener.com
PAT version changed Version number in Program Allocation Table has changed
but no change to program lineup.
PCR disappeared Formerly valid Program Clock Reference ceases to be
received or becomes corrupt. See "No PCR" indication.
PCR jitter Excessive jitter in Program Clock Reference values. This
may degrade timing of output video signals. Check uplink
encoder for that program.
PCR value jump Unrecoverable transition in incoming Program Clock Refer-
ence values. This has forced re-initialization of services.
Check uplink encoder for that program.
PMT disappeared Formerly valid Program Map Table ceases to be received or
becomes corrupt. See "No PMT" indication.
PMT version changed Version number on one or more of the Program Map Tables
has changed but no change to PID lineup.
Prog blackout on ASI Some services available from satellite not routed to IRD
ASI output per program mapping instructions from
COMPEL

. This is not necessarily a fault.
Program in blackout Selected program not available for local decompression
because this program content was blocked to ASI transport
output by network. Contact network TOC.
Program not found Program selected for local decompression (to local audio/
video outputs) not available-invalid Program number for
this Transport.
Reverted to b-up app User-requested application failed self-test and Unit reverted
to Backup application. Notify your network TOC.
RF signal overload No carrier lock with RF signal power above specification
range. There may be too much line amplification in RF
feed.
SDT disappeared Formerly valid Service Descriptor Table ceases to be
received or becomes corrupt. See "No SDT entry" indica-
tion.
Sec Micro no resp
Secure processor does not respond to local host or may be
missing. SIM card may be mis-installed, loose, or defective.
Sel Program not Auth User-selected program is not authorized by (PPA) CA system.
Ser pt
N
fail
(
N
=audio port number)
Unknown or miscellaneous hardware failure on serial port
N
.
Table 8: Alarm and Warning Descriptions
LCD Alarm or Warning
Message
Meaning / Possible Cause