User`s manual

Unity 4650 User’s Manual
wegener.com 51 800034-01 Rev. A
AUXPID
[PID]
PID: Selects the PID (in hex) for the Transport packets carrying the desired
data stream. Must be ‘20’ to ‘1ffe’ inclusive. If PID is omitted, the current
value is displayed.
Sets the PID used for Aux Data extraction.
CLRDIAG
Clears all the volatile counts and statistics, as if the unit was reset. A Local
Control Command (available from the terminal regardless of "Local Control
Enable/Disable" commands from the network).
CLRIND
Clears both current “Acknowledged” Alarm and Warning indications and
(past) Latched Alarm indications. A Local Control Command (available from
the terminal regardless of "Local Control Enable/Disable" commands from the
network).
DELS
entry
entry: Value from 1 up to max (given in section 2.1) indicating entry number
in settings table.
Deletes an entry in the Preset Table.
DPAT
Command reports current Program Allocation Table (PAT) from incoming
transport stream.
DPSI
Command reports complete PSI information tracing all programs and their
components to MPEG PIDs. A Local Control Command (available from the
terminal regardless of "Local Control Enable/Disable" commands from the
network).