User`s manual

Unity 4650 User’s Manual
800034-01 Rev. A 50 wegener.com
APPSTAT
Forces IRD to report the status of the two application storage spaces, showing
current and backup application software (if any).
A Local Control Command (available from the terminal regardless of "Local
Control Enable/Disable" commands from the network).
APPSWITCH
Unloads the currently executing application software and, instead, loads and
runs the backup software.
ARMODE
mode
mode:
auto -
the output aspect ratio is the same as the input, whether 4:3 or 16:9.
4:3 - the output aspect ratio OUTPUT is forced to 4:3.
Command to set the aspect ratio mode.
AUDATTEN
port# atten
port#: Either "1" or "2" for audio ports 1 or 2.
atten: Must be a numeric value for attenuation in dB. Legal values are given in
individual IRD specifications.
Command to set audio attenuation, where ‘0’ gives 0dB attenuation (maximum
level). A Local Control Command (available from the terminal regardless of
"Local Control Enable/Disable" commands from the network).
AUDIOMODES
Lists all the supported audio decompression or pass-through modes
(e.g. MPEG1 Layer 2, Dolby AC-3, MP3, SMPTE302, etc.)
AUDMON
port#
port#: Either "1" or "2" for audio ports 1 or 2.
Connects a sample of audio port port# to the single audio monitor jack (where
available). A Local Control Command (available from the terminal regardless
of "Local Control Enable/Disable" commands from the network).