Specifications

Supported Devices
Sumavision Technologies, Inc.
68
EMR-D8020
The EMR-D8020 is a stand-alone device, designed to fulfill the market demands of decoding
head-end programs and receiving satellites. The EMR-D8020 supports stream inputs including
DVB-S/S2, ASI, IP and so on, and output support ASI and TS over IP. In addition the decoding
output option has HD-SDI, CVBS, YPbPr, HDMI, Analog Audio,AES/EBU Audio and the
decoding input function supports FRAME_SYNC.
The plug-in supports nine types of alarms, as follows:
• Health alarms
• Input DVB2 alarms
• Input ASI alarms
• Input IP alarms
• Output ASI alarms (Port 1)
• Output ASI alarms (Port 2)
• Output IP alarms (Global Ethernet)
• Output IP alarms (Port 1)
• Output IP alarms (Port 2)
Health monitoring alarms
Alarm name Type MIB point Further details
--- Health monitoring alarms ---
Device
Communication
Status/health sysUpTime (RFC1213) Raise a critical condition if the device stops
responding to polling for a time period defined
bypollinterval X retries.
Device Restart Status/health
sysUpTime (RFC1213) Raise a minor condition based on the value of
sysUpTime read is smaller by at least 60 seconds
compared to last reading. The value increase by
100 every second.
--- Input DVBS2 alarms ---
All the following are elements related to signal input with type tuner DVBS2. All those elements are
display in a subfolder named ‘Input DVBS2’.
LockStatus StatusText/Signal dvbs2InLockStatus DVB-S/S2 Input Status. "unlock" (Critical error) or
"lock" (nominal case)