Specifications

iControl
Supported Device Reference Guide
59
lnb Voltage Text/Signal lnbVoltage Tuner power, Option: 0v,13v,18v
lnb 22KHz Text/Signal
lnb22KHz Tuner 22 KHz, option: off or on
Tuner type selected Text/Signal
typeSel tuner type
--- Input ASI alarms ---
All the following are elements related to signal input with type ASI. All those elements are displayed
in a subfolder named ‘Input ASI’.
Lock Status/Signal asiLock ASI Lock
Packet Length Text/Signal
asiPacketLen packet length: 188 or 204
Total Bitrate Text/Signal
asiTotalBitrate total bit Rate size: from 0 to 100Mbps
Valid Bitrate Text/Signal
asiValidBitrate valid Bit rate: from 0 to 100Mbps
--- Input IP alarms ---
All the following are elements related to signal input with type IP. All those elements are displayed in
a subfolder named ‘Input IP’.
Lock Status/Signal ethernetInLock Ethernet Lock
Packet Length Text/Signal
ethernetInPacketLen packet length: 188 or 204
Total Bitrate Text/Signal
ethernetInTotalBitr
ate
total bit Rate size: from 0 to 100Mbps
linkStatus StatusText/Si
gnal
linkStatus Ethernet link status (none, 10M, 100M). Status is set to
NORMAL if link is 10M or 100M. If none, or unknown,
status is set to
CRITICAL.
--- Output ASI alarms: Out 1 ---
All the following are elements related to signal output with type ASI.
There are two output ports. The following is the set of alarms for Port 1.
Subfolder: Output ASI/Out 1
Source Text/Signal sourceSel1 select source, qpsk:0, asi:1, ds3:2
Package Length Text/Signal
packageLength1 package length, 188 or 204
--- Output ASI alarms: Out 2 ---
All the following are elements related to signal output with type ASI.
There are two output ports. The following is the set of alarms for Port 2.
Subfolder: Output ASI/Out 2
Source Text/Signal sourceSel2 select source, qpsk:0, asi:1, ds3:2
Package Length Text/Signal
packageLength2 package length, 188 or 204
--- Output IP alarms ---
There is only one IP output port.
IP address Text/Signal ipAddress Ethernet output ip address
Stream UDP port Text/Signal
streamUDPPort ethernet output stream UDP port
Health monitoring alarms ( Continued)
Alarm name Type MIB point Further details