Specifications

iControl
Supported Device Reference Guide
51
Flash Total Text flashTotal (DSR4440) Poller Gives the total size of the Flash
expressed in B(Bytes) that is
available for the operating system
Memory Available Status/Text
memAvail (DSR4440) Poller Gives the size of the free heap
memory left, expressed in B(Bytes)
that is available for the operating
system, the threshold is defined
based on the 20% of the total size
of the memory
Memory Total Text
memTotal (DSR4440) Poller Gives the total size of the heap
memory expressed in B(Bytes) that
is available for the operating
system
System Uptime Text
sysUpTime (RFC1213) Poller System up time alarm, this is a
default health monitoring alarm
when you use the generic.js to
create a new custom driver
Service alarms
Alarm name Type MIB point Polling or
trap?
Further details
--- LED status alarms ---
Authorized Status/Text authorizedLED Fast poller The Authorized LED is on (illuminated)
when the Signal LED is on and the
programmer has transmitted the access
messages to allow the unit to decrypt
the signal
Relay 1 Status/Text
relay1LED Fast poller The relay1 LED is on ( illuminated ) when
relay1 is closed
Relay 2 Status/Text
relay2LED Fast poller The relay2 LED is on ( illuminated ) when
relay2 is closed
Relay 3 Status/Text
relay3LED Fast poller The relay3 LED is on ( illuminated ) when
relay3 is closed
Signal Status
signalLED Fast poller The Signal LED is on (illuminated) when
the unit recognizes the signal as a
DigiCipher II signal
--- Signal lock alarms ---
Primary Audio Lock Status primaryAudioLock Fast poller Verifies if the Primary Audio is locked
Secondary Audio Lock Status
secondaryAudioLock Fast poller Verifies if the Secondary Audio is locked
video Lock Status
videoLock Fast poller Verifies if the Video is locked
Health monitoring alarms ( Continued)
Alarm name Type MIB point Polling
or
trap?
Further details