Specifications

Supported Devices

Plug-in Notes

Certain parameters may be passed to the plug-in, as follows:

Plug-in Notes

• This plug-in is based on generic.js.

• All MIB points are static.

reference Text/health moreStatus internal/external reference

polarization Text/health

moreStatus polarization (none, horizontal, vertical)

setup title Text/health

moreStatus Setup Title

slope Text/health

moreStatus Slope in dB

impedance Text/health

moreStatus 50 ohm or 75 ohm

Parameter Description

AlarmPath Used to set the Alarm prefix.

Default:

PBI.

Could be replaced by

IRD so as to have legacy plug-ins tree look-like.

pollInterval Poller interval in seconds. Overwrite the default interval of 20 seconds.

retries If an SNMP request times out, this defines the number of retries to be performed.

Default:

timeout Delay in seconds before declaring a timeout in the current SNMP request.

uniqueID An extra identifier to be assigned to the plug-in to differentiate its alarms from the other

plug-in of the same type. The

uniqueID should be part of the URI.

readCommunity SNMP read community string. Use for SNMP polling.

Default:

public

pos15vThresh

Threshold for +15V voltage supervisor.

Default:

The alarm +15V Supply rail becomes critical when the measured voltage is under the

threshold.

pos5vThresh Threshold for +5V voltage supervisor.

Default:

The alarms +5V Supply rail A and +5V Supply rail B become critical when the measured

voltage is under the threshold.

neg15vThresh Threshold for -15V voltage supervisor.

Default:

The alarm -15V Supply rail becomes critical when the measured voltage is above the

threshold.

(

Continued)

Alarm name Type MIB point Further details