Specifications

Supported Devices
IRTrans
36
IRTrans
LAN Controller XL Infrared Control System
The IRTrans LAN Controller XL is an infrared LAN controller with eight IR outputs, an RS232
interface, 2 inputs for external receivers, 4 relay outputs, and a 10/100 Mb Ethernet
connection.
Device Restart
Status/health
Poller sysUpTime
(RFC1213)
Raise a minor condition based on the value of
sysUpTime read is smaller by at least 60 seconds
compared to last reading. The value increase by
100 every second.
System uptime
text/health
Poller
sysUpTime
(RFC1213)
System up time alarm, this is a default health
monitoring alarm when you use the
generic.js to create a new custom driver
--- Signal alarms ---
hw_revision Text Fast poller hw_revision
sw_version Text Fast poller sw_version
serial_number Text Fast poller serial_number
fault input 1 Status Fast poller fault_input_1
fault input 2 Status Fast poller fault_input_2
power A Status Fast poller power_A_status
power B Status Fast poller power_B_status
control_source Text Fast poller control_source
fp_force_mode Text Fast poller fp_force_mode
contact closure Status Fast poller input_contact_
closure
switch mode Text Fast poller switch_mode
switch state Text Fast poller switch_state
fault output Status Fast poller fault_output
Ordering information
Hardware New in iControl
version
GSM plug-in name Order number
"LAN Controller XL Infrared
Control System"
SNMP — IRTrans LAN Controller XL IC—DR—016
( Continued)
Alarm name Type Polling or
trap?
MIB point Further details