Specifications

iControl

Supported Device Reference Guide

Certain parameters may be passed to the plug-in, as follows:

Harris (Leitch)

program Xc Not Descrambled Text/Status Yes

cam Packet Loss Text/Status Yes

cam Zero Bitrate Text/Status Yes

cam Descrambling Failure Text/Status Yes

satellite Per Too High Text/Status Yes

cam Input Overflow Text/Status Yes

embedded Descrambler Input Overflow Text/Status Yes

input Bitrate Overflow Text/Status Yes

Parameter Description

alarmPath Force a Path where to create the plugin alarms

pollInterval Fast poller interval in seconds. Overwrite the default interval of 20 seconds.

retries If an SNMP request timeout, this defines the number of retries to be performed. Default is 1.

timeout Delay in seconds before declaring a timeout in the current SNMP request.

uniqueID An extra identifier to be assigned to the plugin to differentiate its alarms from the other plugin

of the same type. The uniqueID should be part of uri.

readCommunity SNMP read community string. Use for SNMP polling.

lightweightDriver Set the plugin to monitor only criticals alarms. Default is false.

signalForcedSeverity Text indicating the forced severity for service alarms. Possible values: CRITICAL, MAJOR,

MINOR

healthForcedSeverity Text indicating the forced severity for health alarms. Possible values: CRITICAL, MAJOR, MINOR

Ordering information

Hardware New in iControl

version

GSM plug-in name Order number

"IconStatus Channel Branding" 4.30

SNMP — Harris IconStation IC-SNMP-148

"NetPlus M400 Integrated

Receiver/Decoder"

4.30 SNMP — Harris NetPlus M400 IC-SNMP-156

"NetVX Contribution Encoder" SNMP — Harris NetVx Frame IC-SNMP-157

"Panacea Routing Switcher" SNMP — Harris Panacea IC-SNMP-096

(

Continued)

Alarm name Type Optional? Further details