Specifications

Supported Devices
Cisco
10
signalActiveSecondaryDevices A list of secondary devices that are active, and which primary devices they are
recovering.
<recovery report> := <device summary><NL><device list>
where
<device summary> := <# Active>' secondaries active'
<# Active> := number of active secondaries
<device list> := <device recovery>...
<device recovery> := <secondary>' active for: '<primary>
<secondary> := <device name>
<primary> := <device name>
Other symbols are defined as for
signalMajorAlarmDevices.
signalHighlightAlarmDevices A list of devices in the signal that are reporting highlighted alarms. Up to 9 alarms
may be highlighted. The list of alarms that cause an alarm to be highlighted is
configurable on the server by customer service.
<report> := <device summary><NL><device list>
where
<device summary> := <# Alarms>' devices reporting highlighted alarms'
<# Alarms> := number of devices with highlighted alarms
<device> := <name>':'<alarm list><NL>
<alarm list> := <alarm number>...
Other symbols are defined as for
signalMajorAlarmDevices.
signalMajorAlarmDevices A list of devices in the signal that are reporting major alarms.
<report> := <device summary><NL><device list>
where
<device summary> := <# Alarms>' devices reporting major alarms'
<# Alarms> := Number of devices with a major alarm
<NL> := newline
<device list> := <device>...
<device> := <device name>:<state><NL>
<device name>
:= <type><signal #><role><unit #>
<type>
:= 'MUX' | 'MOD' | 'AVS' | 'ENC' | <3 alpha chars>
<signal #>
:= integer signal number
<role> := 'P' | 'S'
<unit #> := unit # of the device
<state> := 'Fail' | 'Maint'
signalName The signal name as defined in the Signal Parameters view
( Continued)
Alarm name Further details