Instruction manual

Page 72
UTY4422-001 Page 72 of 74
E. Sync Data Output Card 2 Module #1
*
See configuration below
F. 4 Port RF Input Switch Card 1 Module #2
**
Not configurable
A. Balanced Audio Card(s) Configuration
First Option Audio Card (Module #1 Location)
A.1 Channel 3 Audio Routing: (
Stereo
, Reverse Stereo, Orig. L to both, Orig. R to both)
2
A.2 Channel 4 Audio Routing: (
Stereo
, Reverse Stereo, Orig. L to both, Orig. R to both)
2
A.3 Channel 3 Program: ____________ ( need three-character code, default is
*
for lowest found)
A.4 Channel 4 Program: ____________ ( need three-character code, default is
*
for lowest found)
Second Option Audio Card (Module #2 Location)
A.5 Channel 5 Audio Routing: (
Stereo
, Reverse Stereo, Orig. L to both, Orig. R to both)
2
A.6 Channel 6 Audio Routing: (
Stereo
, Reverse Stereo, Orig. L to both, Orig. R to both)
2
A.7 Channel 5 Program: ____________ ( need three-character code, default is
*
for lowest found)
A.8 Channel 6 Program: ____________ ( need three-character code, default is
*
for lowest found)
2
“Orig L or R” designates original L or R inputs to the MPEG encoder unit
B. 14 Function Relay Card Configuration
All (
Relays Open when Activated
(N.C.) , Relays Close when Activated (N.O.) , Custom)
Each relay custom setup N.C. or N.O. when activated
Relay #1______ Relay #2______ Relay #3______ Relay #4______ Relay #5______
Relay #6______ Relay #7______ Relay #8______ Relay #9______ Relay #10______
Relay #11______ Relay #12______ Relay #13______ Relay #14______