Instruction manual

Page 49
Page 49 of 74 UTY4422-001
Appendix B
FRONT PANEL DISPLAY
B1.1 HOME SCREEN
If alarm or warning condition is active:
A L A R M
m s g
or
W A R N I N G :
m s g
where msg is a string identifying the condition (See Section 3.2 for warning and alarm
conditions.).
If unit is inserting:
R F I N : 1 F R E Q : 0 0 0 0 0 . 0 0
P R O G : x x x x x x
x x x x
T E M P
or else (typical screen without alarms or warnings):
R F I N : 1 F R E Q : 0 0 0 0 0 . 0 0
P R O G : x x x x x
where xxxxx is program number (5 digits) or descriptor ).
To provide easy access to the unit’s serial number, press <ENTER> from the Home Screen to
display the serial number for approximately 10 seconds.
B1.2 EMAIL
At the main (first) menu level, one of three screens is displayed, depending on the status of e-
mail (none, e-mail present and un-read, or e-mail present and read). they are shown in that order
below. Also, the Warning LED will be illuminated.
If email is not received or email is cleared:
E M A I L : N O N E
If EMAIL has been received and not read, top level menu:
E M A I L R E A D : < S E L E C T >
If email has been received and read:
E M A I L R E A D : < S E L E C T >