Instruction manual

70
espresso coffee machine - user instructions
English
8.1 PROGRAMMING COFFEE DOSES
• place the programming lever (1), located under the boiler cover of the machine,
in the ON position;
• insert a pod in the filter holder and attach it to the group, tightening firmly;
• put the coffee cup under the dispensing spout;
• press the PROG/STOP button (2) for about 8-10 seconds; all the dose button
LEDs will come on;
• press the desired dose button(3);
• when the desired dose has been attained, confirm by pressing the PROG/STOP
button (2);
• repeat this operation for the other dose buttons;
• when finished programming, return the programming lever (1) to the OFF
position.
8.2 PROGRAMMING CAPPUCCINO DOSES
• place the programming lever (1), located under the boiler cover of the machine,
in the ON position;
• insert a pod in the filter holder and attach the filter holder to the group, tighte-
ning firmly;
• put the cup under the dispensing spout of the cappuccino maker;
• press the PROG/STOP button (2) for about 5 seconds; all the dose button
LEDs will come on;
• press the desired cappuccino dose button(4);
• delivery of coffee will begin; when the desired dose of coffee is attained, confirm
by pressing the PROG/STOP button (2);
• milk dispensing will start automatically;
• when the desired dose of milk has been attained, confirm by pressing the
PROG/STOP button (2);
• repeat the operation for the other dose button;
• when finished programming, return the programming lever (1) to the OFF
position.
ON
23
3
1
2
4
4
T
he programming of each dose must be done with a new pod and not with previously used pods.
T
he programming of each dose must be done with a new pod and not with previously used pods.
8. PROGRAMMING
All programming operations must be made by qualified technical personnel.
PP
rogramming the doses of the left-hand push button panel fi rst automatically programs the doses of the right-hand rogramming the doses of the left-hand push button panel fi rst automatically programs the doses of the right-hand
PPPP
p
ush button panel. It is, however, both possible and advisable to program the push button panels independently,
p
ush button panel. It is, however, both possible and advisable to program the push button panels independently,
taking care to always start from the left-hand push button panel.taking care to always start from the left-hand push button panel. Furthermore, after havin
g
pro
g
rammed the cap
-
Furthermore, after havin
g
pro
g
rammed the cap
-
p
uccino doses on the left-hand push button panel, the correspondin
g
coffee doses on the ri
g
ht-hand push button
p
uccino doses on the left-hand push button panel, the correspondin
g
coffee doses on the ri
g
ht-hand push button
p
anel must be repro
g
rammed.
p
anel must be repro
g
rammed.