Manual

. nscrew the base from the
tormglass.
. ount the base to a wall or
plaque by inserting the enclosed
self-tapping screw into the base
(screw head nests inside the base)
and screwing it into the wall/
plaque.
. ind the “mounting accessory”
(in the packaging - it has an internally
threaded ring attached to an externally
threaded post) arefully screw the accessory’s
post into the mounted base until snug. ou may
need to rotate the mounted base slightly so the
tormglass is vertical once mounted.
. nvert the tormglass and carefully screw its
post into the accessory’s ring.
. osition the tormglass at the
preferred viewing angle, then lock that
position by screwing the enclosed finial
(brass cap with threaded post) into the
top of the accessory until snug. (Caution: If you
plan to unscrew it in the future, don’t tighten
the finial too much).
. njoy your eems tormglass!
Wall or Plaque Mounting:
Available as an engraved plaque to accompany Stormglass