Owner's Manual

UNDERSTANDING YOUR Smarty Clamps"'
Your Smarty Clamps
71
" have a "smart" box that will help guide you through a
jump with both sight and sound. It will let you know when it is safe to jump
or if there is an error.
e READY
Solid green light, no Sound
Smarty Clamps"" detect that you have a good connection
and you are ready to jump •
• REVERSE+ I· Rashing Green 8c Red Lights+ Beeping
You attached the Smarty Clamps., on the wrong
terminals. Make sure the BLACK clamp is attached to the
battery's NEGATIVE(-) terminal, and the RED clamp is attached
to the battery's POSmvE (+) terminal. If not attached properly,
Weego 66 will not let you jump ~ur engine.
~ COOL DOWN Rashlng Red Ught + Beeping
~ WAITFOR e
This happens when the battery is cranked longer than the
recommended 3 seconds, or if ~ur eng1ne is trying to pull more
power than the Weego 66 is willing to provide. Detach the
Smarty Clampsm from the battery and give the unit up to
3 minutes to cool down. Then, repeat steps 2-5 under Jump
Starting Your Engine.
e SEE REVERSE Solid Red Ught, No Sound
There's a voltage incompatibility. The battery is too weak to
even start OR the system voltage of your vehicle is not
compatible with your Weego 66 (for 12V vehicles ONLY).
e SEE REVERSE Solid Red Ught + Beeping
There may be an enfjne incompatibility issue. If the engine you're
connecting to is larger than what we recommend, it will try to pull
more power than your WeetP 66 is able to give. If this happens,
Weetp 66 will prevent you from jumping your engine. Please see
Engine Compatibility in your owner's manual to determine if your
engine size falls within the scope of~ 66.