Owner's Manual

Visit myweego.com for FAQs and additional troubleshooting inquiries.
I can’t get the Smarty Clamps™ green light to appear.
•Do you have a good connection?
A poor connection between the clamps and the terminals can be the
difference between a successful and failed jump. Adjust the clamps to
make sure they’re making maximum contact with your terminals, then try
again.
•Are your battery terminals dirty?
Build-up on your battery terminals can prevent you from getting a stronger
connection and can be the difference between a successful and failed
jump. See your vehicle owner’s manual for the best way to safely remove
buildup from your terminals.
I followed the necessary steps but my engine is still unable to start.
Now what?
•Does your Weego 66 have enough charge?
When using your Weego 66 peak performance is best achieved with a fuller
charge (greater than 80%, or 4 lights) - if operating at less than 80%, we
suggest recharging your Weego 66, if possible.
•Your engine may be too large/powerful for your Weego 66
Our batteries work hard to supply the power you need, but some engines
demand more than your Weego 66 can give. See Engine Compatibility
(pages 12-13) to determine if your engine falls within the scope of Weego 66.
•Was your vehicle in PARK/NEUTRAL?
If vehicle is not in park (cars/trucks) or neutral (boats/powersports), this
could be preventing you from starting the engine.
•Your vehicle battery may not be the issue.
In most instances a dead battery is preventing an engine start, but there
may be other functions in your vehicle that aren’t working properly. Please
TROUBLESHOOTING
11