Owner's Manual

10
UNDERSTANDING YOUR Smarty Clamps
™
Your Smarty Clamps™ have a “smart” box that will help guide you through a
jump with both sight and sound. It will let you know when it is safe to jump
or if there is an error.
READY
Solid green light, no Sound
Smarty Clamps™ detect that you have a good connection
and you are ready to jump.
Flashing Green & Red Lights + Beeping
REVERSE +/-
You attached the Smarty Clamps™ on the wrong terminals.
Make sure the BLACK clamp is attached to the battery’s
NEGATIVE (-) terminal, and the RED clamp is attached to the
battery’s POSITIVE (+) terminal. If not attached properly,
Weego 66 will not let you jump your engine.
COOL DOWN
WAIT FOR
Flashing Red Light + Beeping
This happens when the battery is cranked longer than the
recommended 3 seconds, or if your engine is trying to pull
more power than the Weego 66 is willing to provide. Detach the
Smarty Clamps™ from the battery and give the unit up to 3
minutes to cool down. Then, repeat steps 2-5 (see page 9).
There’s a voltage incompatibility. The battery is too weak to
even start OR the system voltage of your vehicle is not
compatible with your Weego 66 (for 12V vehicles ONLY).
Solid Red Light, No Sound
There may be an engine incompatibility issue. If the engine
you’re connecting to is larger than what we recommend, it will
try to pull more power than your Weego 66 is able to give. If this
happens, Weego 66 will prevent you from jumping your engine.
Please see Engine Compatibility (pages 12-13), to determine
if your engine size falls within the scope of Weego 66.
SEE REVERSE
Solid Red Light + Beeping
SEE REVERSE